|
ECONO MATRIX SPECIFICATION SHEET
K-MAT - Brown top/yellow base. For flexograhic plate applications. Molded from zinc, magnesium and copper originals.
|
Grade |
Bulk Thickness
+/- 0.010 |
Preheat Time
seconds |
Floor Range |
|
K-2 |
.095" |
30-75 |
.055" - .065" |
|
K-3 |
.140" |
45-90 |
.075" - .085" |
|
K-4 |
.105" |
45-90 |
.055" - .065" |
|
K-5 |
.125" |
45-90 |
.070" - .080" |
|
K-6 |
.205" |
60-90 |
.115" - .125" |
|
K-240 |
.240" |
75-120 |
.145" - .155" |
|
K-250 |
.250" |
75-120 |
.145" - 155" |
|
K-300 |
.300" |
75-120 |
.145" - .155" | |
R-MAT - Special "release free" red top/yellow base. For flexographic plate applications. Molded from magnesium and copper originals.
|
R-80 |
.140" |
45-90 |
.075" - .085" |
|
R-120 |
.205" |
60-90 |
.115" - .125" | |
Uncoated Board - Yellow. For powder filled molds from zinc, magnesium and type forms. For deep relief applications.
|
K-16 |
.195" |
based on application |
based on application | |
S-MAT - Brown top/yellow base. Specifically designed for flexographic plate and rubber stamp applications. Molded from photopolymer and rubber masters.
|
S-3-20 |
.150" |
105-135 |
.090" - .100" |
|
S-120 |
.210" |
105-150 |
.135" - .145" | |
Soft Uncoated Board - Yellow. For powder filled molds from photopolymer and rubber masters. For deep relief applications.
|
S-12 |
.185" |
based on application |
.150" - .160" |
|
S-13 |
.125" |
based on application |
.095" - .105" | |
Build-up Paper - Yellow. For use as a control sheet in sandwich molds for deep relief applications. Available in .040" and .060" thickness.
| 